It was dark so I could not see much but I could not goto sleep. I wanted it to be daytime so I could pull it out of the dark trailer and have some sunlight! Sunday comes and it is a perfect and sunny 80 degree day. Below are some pictures of Bimmerworld's completed project. The welds are nice, and there were a few finishing touches that I did not ask for (nice pieces like the dead pedal, etc). The passenger side foot protection extends further inboard to give me added strength from a supported frame structure, there is a nice downtube from the doorbars that give me a jack point (unwelded), and there is a nice horizontal bar below the driver X for more strength and safety. They unverted the stock hood latch so now all I need to do is push it and viola! They also ditched the VAC floor mounts and custom made a seat mount tied into the cage structure. Im very impressed and highly suggested the skilled artisans at Bimmerworld who do cage work!
Next: The car goes back to Givens Collision mentioned earlier in my blog to paint the interior!